skip to main content
Menu

News Archive: February 2013

Typical rustproofing mistakes 8/9

Typical rustproofing mistakes 8/9

Friday, 1st February 2013

Avoid blocking drain holes with wax or underseal. They are designed to allow water to drain through the chassis or body. Blocking them will result in a water-filled crossmember or sill, for example. http://www.smithandallan.com/hammerite.aspx, Read more...

Typical rustproofing mistakes 9/9

Typical rustproofing mistakes 9/9

Monday, 4th February 2013

Take your time when rustproofing. Preparation is key, so ensure the area you want to rustproof is clean and surrounding surfaces are protected. There's no point in simply slapping on some underseal to the underside of a rusty or dirty car. http://ww, Read more...

Petro-Canada give Smith & Allan UK distributorship

Petro-Canada give Smith & Allan UK distributorship

Tuesday, 26th February 2013

We are proud to announce that we have been selected by Petro-Canada to distribute their products in the UK. Check out this short introductory video... http://lubricants.petro-canada.ca/video, Read more...